Terrier

For vertical lifting and transporting of steel plates. The TS lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. The clamp is locked in closed as well as in open position. The STS is similar but offers a larger jaw opening.

Features:

  • Lightweight design for easy handling.
  • Tough quality heavy duty welded shell body.
  • Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
  • Clamp is locked in closed as well as open position.
  • Maintenance-friendly, easy to exchange parts which are available upon request .
  • Signal colouring on lifting eye and locking lever for extra safety.
  • Marking: According to standard, CE-marked, Type, serial number, WLL, Jaw opening.
  • Temperature range: - 40°C up to +100°C.
  • Standard: EN 13155
  • Note: Hardness level of the material surface may not exceed 37 HRC (345 HB, 1166 N/mm2).
  • Warning: Min. load is 10% of max. WLL.
Select a row from the table below, then click the add to quote button
Part Code Code WLL
ton
Jaw width
mm
S
mm
T
mm
U
mm
V
mm
W
mm
X
mm
Y
mm
Weight
kg
LTTS075 0.75 TS 0,75 0-13 47 30 202 100 37 37 10 1,7
LTTSE1 1 TSE 1 0-25 56 45 263 141 37 47 15 3,5
LTTSE2 2 TSE* 2 0-35 78 64 336 183 56 56 16 7
LTTSE3 3 TSE* 3 0-35 78 64 336 183 56 56 16 7
LTTSE45 4.5 TSE 4,5 0-45 85 70 425 228 60 78 20 16
LTTS6 6 TS 6 0-32 114 75 490 225 78 78 20 19
LTTSE75 7.5 TSE 7,5 0-55 111 75 522 267 70 86 20 26
LTTS9 9 TS 9 0-55 111 75 522 267 70 86 20 27
LTTS120 12 TS 12 0-52 148 85 617 295 100 94 44 37
LTTS150 15 TS 15 0-76 209 86 810 373 136 106 49 70
LTTS250 25 TS 25 5-85 250 100 925 563 148 140 66 149
* Available with a remote control
 
 
 
 
 
 
 
 
 
 
 

info / downloads