Haklift

Lifting eye screws for vertical lifting

 

  • Features: Only for vertical lifting
  • Material: Steel
  • Marking: According to standard, CE-marked
  • Temperature range: -20 - (+)200°C
  • Finish: Electro galvanized
  • Standard: DIN 580
  • Note: Larger sizes and inch sizes also available
  • Safety factor: 4:1
Select a row from the table below, then click the add to quote button
Part Code WLL
ton
Thread d1 Packing d2
mm
d3
mm
d4
mm
h
mm
k
mm
l
mm
Weight
kg
NSR06 0.08 M 6 50 20 36 20 18 8 13 0.045
NSR08 0.14 M 8 50 20 36 20 18 8 13 0.05
NSR10 0.23 M10 50 25 45 25 22.5 10 17 0.09
NSR12 0.34 M12 25 30 54 30 26 12 20.5 0.16
NSR14 0.34 M14 25 35 63 35 30.5 14 27 0.24
NSR16 0.7 M16 10 35 63 35 30.5 14 27 0.24
NSR18 0.7 M18 10 40 72 40 35 16 30 0.36
NSR20 1.2 M20 10 40 72 40 35 16 30 0.36
NSR22 1.2 M22 1 45 81 45 40 18 35 0.58
NSR24 1.8 M24 1 50 90 50 45 20 36 0.72
NSR27 2.5 M27 1 50 90 50 45 20 36 0.7
NSR33 3.2 M33 1 65 108 60 55 24 45 1.3
NSR30 3.2 M30 1 65 108 60 55 24 45 1.32
NSR39 4.6 M39 1 75 126 70 65 28 54 2.02
NSR36 4.6 M36 1 75 126 70 65 28 54 2.08
NSR45 6.3 M45 1 85 144 80 75 32 63 3.04
NSR42 6.3 M42 1 85 144 80 75 32 63 3.11
NSR52 8.6 M52 1 100 166 90 85 38 68 4.95
NSR48 8.6 M48 1 100 166 90 85 38 68 5.02
NSR56 11.5 M56 1 110 184 100 95 42 78 6.69
NSR64 16 M64 1 120 206 110 105 48 90 9.3

WORKING LOAD LIMITS

  Load 1 Load 6 Load 2 Load 5  
Load 3
Load 3 Load 4 Load 4
Thread WLL (t) WLL (t) WLL (t) WLL (t) WLL (t) WLL (t) WLL (t) WLL (t)
          0 - 45° 45-60° 0 - 45° 45-60°
M6 0,08 not allowed 0,16 not allowed 0,05 not allowed 0,08 not allowed
M8 0,14 not allowed 0,28 not allowed 0,1 not allowed 0,14 not allowed
M10 0,23 not allowed 0,46 not allowed 0,17 not allowed 0,23 not allowed
M12 0,34 not allowed 0,68 not allowed 0,24 not allowed 0,34 not allowed
M14 0,34 not allowed 0,68 not allowed 0,24 not allowed 0,34 not allowed
M16 0,7 not allowed 1,4 not allowed 0,5 not allowed 0,7 not allowed
M18 0,7 not allowed 1,4 not allowed 0,5 not allowed 0,7 not allowed
M20 1,2 not allowed 2,4 not allowed 0,83 not allowed 1,2 not allowed
M22 1,2 not allowed 2,4 not allowed 0,83 not allowed 1,2 not allowed
M24 1,8 not allowed 3,6 not allowed 1,27 not allowed 1,8 not allowed
M27 2,5 not allowed 5 not allowed 1,78 not allowed 2,5 not allowed
M30 3,2 not allowed 6,4 not allowed 2,28 not allowed 3,2 not allowed
M33 3,2 not allowed 6,4 not allowed 2,28 not allowed 3,2 not allowed
M36 4,6 not allowed 9,2 not allowed 3,28 not allowed 4,6 not allowed
M39 4,6 not allowed 9,2 not allowed 3,28 not allowed 4,6 not allowed
M42 6,3 not allowed 12,6 not allowed 4,5 not allowed 6,3 not allowed
M45 6,3 not allowed 12,6 not allowed 4,5 not allowed 6,3 not allowed
M48 8,6 not allowed 17,2 not allowed 6,1 not allowed 8,6 not allowed
M52 8,6 not allowed 17,2 not allowed 6,1 not allowed 8,6 not allowed
M56 11,5 not allowed 23 not allowed 8,3 not allowed 11,5 not allowed
M64 16 not allowed 32 not allowed 11 not allowed 16 not allowed
M72 20 not allowed 40 not allowed 14,28 not allowed 20 not allowed
M80 28 not allowed 56 not allowed 20 not allowed 28 not allowed
M100 40 not allowed 80 not allowed 28,57 not allowed 40 not allowed

 

 

 

 

info / downloads