Lifting eye nuts for vertical lifting
- Features: Only for vertical lifting
- Material: Steel
- Marking: According to standard, CE-marked
- Temperature range: -20 - (+)200°C
- Finish: Electro galvanized
- Standard: DIN 582
- Note: Larger sizes and inch sizes also available
- Safety factor: 4:1
Select a row from the table below, then click the add to quote button
WORKING LOAD LIMITS
 |
 |
 |
 |
|
 |
 |
|
||
| Thread | WLL (t) | WLL (t) | WLL (t) | WLL (t) | WLL (t) | WLL (t) | WLL (t) | WLL (t) | |
| 0 - 45° | 45-60° | 0 - 45° | 45-60° | ||||||
| M6 | 0,06 | not allowed | 0,12 | not allowed | 0,042 | not allowed | 0,06 | not allowed | |
| M8 | 0,14 | not allowed | 0,28 | not allowed | 0,1 | not allowed | 0,14 | not allowed | |
| M10 | 0,23 | not allowed | 0,46 | not allowed | 0,17 | not allowed | 0,23 | not allowed | |
| M12 | 0,34 | not allowed | 0,68 | not allowed | 0,24 | not allowed | 0,34 | not allowed | |
| M14 | 0,34 | not allowed | 0,68 | not allowed | 0,24 | not allowed | 0,34 | not allowed | |
| M16 | 0,7 | not allowed | 1,4 | not allowed | 0,5 | not allowed | 0,7 | not allowed | |
| M18 | 0,7 | not allowed | 1,4 | not allowed | 0,5 | not allowed | 0,7 | not allowed | |
| M20 | 1,2 | not allowed | 2,4 | not allowed | 0,83 | not allowed | 1,2 | not allowed | |
| M22 | 1,2 | not allowed | 2,4 | not allowed | 0,83 | not allowed | 1,2 | not allowed | |
| M24 | 1,8 | not allowed | 3,6 | not allowed | 1,27 | not allowed | 1,8 | not allowed | |
| M27 | 2,5 | not allowed | 5 | not allowed | 1,78 | not allowed | 2,5 | not allowed | |
| M30 | 3,2 | not allowed | 6,4 | not allowed | 2,28 | not allowed | 3,2 | not allowed | |
| M33 | 3,2 | not allowed | 6,4 | not allowed | 2,28 | not allowed | 3,2 | not allowed | |
| M36 | 4,6 | not allowed | 9,2 | not allowed | 3,28 | not allowed | 4,6 | not allowed | |
| M39 | 4,6 | not allowed | 9,2 | not allowed | 3,28 | not allowed | 4,6 | not allowed | |
| M42 | 6,3 | not allowed | 12,6 | not allowed | 4,5 | not allowed | 6,3 | not allowed | |
| M45 | 6,3 | not allowed | 12,6 | not allowed | 4,5 | not allowed | 6,3 | not allowed | |
| M48 | 8,6 | not allowed | 17,2 | not allowed | 6,1 | not allowed | 8,6 | not allowed | |
| M52 | 8,6 | not allowed | 17,2 | not allowed | 6,1 | not allowed | 8,6 | not allowed | |
| M56 | 11,5 | not allowed | 23 | not allowed | 8,3 | not allowed | 11,5 | not allowed | |
| M64 | 16 | not allowed | 32 | not allowed | 11 | not allowed | 16 | not allowed | |
| M72 | 20 | not allowed | 40 | not allowed | 14,28 | not allowed | 20 | not allowed | |
| M80 | 28 | not allowed | 56 | not allowed | 20 | not allowed | 28 | not allowed | |
| M100 | 40 | not allowed | 80 | not allowed | 28,57 | not allowed | 40 | not allowed |
|
|
info / downloads
info / downloads
